Square Base Vertical Discharge Cowls – RVS180
Performance Curve - RVS180
Description
The Vertical Discharge Cowls are ideal in ducted systems
where the fan is mounted remotely below roof level.
They work together with a mechanical exhaust system while
preventing the entry of rain when not in use. These durable
and robust units are available with a flanged or square base
for mounting on circular duct and flues or square upstands
respectively.
There are 16 sizes in the range handling air flows from
0.1 to 70m3/s
Features
- Enables the vertical discharge of air while preventing rain from entering building.
- Steel components have a corrosion resistant finish.
- Fitted with reliable gravity air-operated backdraft shutters.
Construction
Backdraft shutters: Sizes 31 to 80 - Made from aluminium.
Sizes 90 to 200 - Made from galvanised sheet steel.
Cowls are of galvanised steel.
Fitted with gravity air-operated backdraft shutters.
Steel components have a corrosion resistant finish.
Special Note
Vertical Discharge Cowls are designed for relatively high
air discharge velocity. At low discharge velocities, rain could
enter the building. For these types of applications an Alpha Relief
Air Vent is recommended.
For any application where prevailing winds may lift the shutters
of the Vertical Discharge Cowl, we recommend the fitting of
Magloks®.
Ensure the hinge of the shutter points down the slope of the roof.
Suggested Specification
The vertical discharge cowls shall be of the RVF or RVS series
as designed and manufactured by Fantech Pty Ltd.
Each unit shall incorporate gravity air-operated backdraft
shutters that are constructed from aluminium or galvanised
sheet steel.
Cowls are of galvanised steel and steel components shall have a
corrosion resistant finish.
Dimensions
| A |
B |
C |
D |
E |
| 1880 |
2080 |
2053 |
1800 |
1000 |
*All dimensions in mm, unless otherwise stated
