PFA304E fans - Profile Fan Series

Description

The Profile Roof Fan has been developed to reduce the installation costs of roof mounted units by eliminating the need for an upstand. They are simple to install, require no additional flashing and are available in most metal-deck profiles. There are 2 sizes in the range and these fans are available with axial flow and backward-curved centrifugal impellers.

Features

Available with high pressure backward-curved centrifugal impellers and high air flow axial impellers.
Axial version available as supply or exhaust unit, centrifugal version available in exhaust only.
Easy to install by simply cutting hole in roof and fixing fan with tek-screws.
No need for costly upstands and flashing.
To weather proof simply add a bead of silicon around metal-deck and roof.
Inlet spigot available for ducted installations.
Fits onto most metal-deck profiles. See "How To Order” for complete range.
Lightweight but sturdy construction.
Can be mounted at angles up to 30°.

Construction

Cowl, base and inlet spigot are made of UV-stabilised plastic, steel components have a corrosion resistant finish. Includes either axial flow or backward-curved centrifugal impellers.

Motors

Type - external rotor, squirrel cage induction motors
Electricity supply - 230V, single-phase, 50/60Hz
Bearings - sealed-for-life, ball
Speed-controllable

Internal Thermal Protection

Internal Thermal Contacts as standard

Testing

Air flow tests to BS848:Part 1 1980
Noise tests to BS848:Part 2, 1985

Suggested Specification

The roof ventilators shall be of the Profile Fan Series as designed and manufactured by Fantech Pty Ltd. The axial or centrifugal impellers shall be direct-driven by speed-controllable external rotor motors with integral thermal protection. Plastic components shall be UV-stabilised and steel components shall have a corrosion resistant finish. All models shall be fully tested as a complete assembled unit to BS848:Part 1, 1980 for air flow and BS848:Part 2, 1985 for noise.