IMFEC150 fans - IMFEC MixedFlow EC Series

Description

The IMFEC in-line fan delivers efficient EC mixed-flow performance with low energy consumption for both domestic and commercial ventilation applications. It features an integrated variable speed controller that can be adjusted locally on the fan only. The IMFEC is also available with an optional on-board adjustable run-on timer (1–60 minutes), allowing steam and odours to continue being exhausted after the room is vacated.

Features

3 fan sizes: Suits 100, 150 and 200mm duct diameters
Speed controllable via on-board potentiometer
Optional ROT models include a built-in adjustable 1-60 min run-on timer
Main fan body is easily removed without dismantling the ducting
Highly efficient single-phase EC motor
Fan can be mounted in any position
Junction box can be rotated to any position
IMFEC inline fans are not designed to be connected to a building management system.

Construction

Casings and impellers are manufactured from reinforced, injection moulded, ABS plastic.

Motors

Type - high performance, energy efficient brushless DC motor.
Electricity supply – 110 to 240V, 50/60Hz
Integrated variable speed controller that can be adjusted locally on the fan only
Bearings - sealed for life, ball.
Rated Class B Insulation, IP44

Internal Thermal Protection

Manual-reset thermal overload protection device in accordance with mandatory requirements for in-duct fans AS/NZS60335-2-80.

Testing

Air flow tested to ISO5801:2017
Noise tested to ISO 13347-3 2004

Suggested Specification

The In-line fans shall be of the IMFEC Series as supplied by Fantech Pty. Ltd.
Impellers shall be of mixed-flow design and driven by single-phase EC motors with thermal overload protection.
Fans shall include integrated variable speed controller that can be adjusted locally on the fan only, and integrated run on-timer as required.
They shall include an integral mounting foot and the fan body able to be removed without disturbing connecting ductwork. All models shall be fully tested to ISO5801: 2017 for airflow and ISO 13347-3 2004 for noise.