Products   Attenuators By Types   Circular Attenuators  Q-Seal Circular 2D Open Type
Q-Seal Circular 2D Open Type – C2-071QS
Q-Seal Circular 2D Open Type
Detailed Information - C2-071QS
Diameter
 [mm]
External
Diameter
[mm]
Length
 [mm]
dB(A)
reduction
Weight
[kg]
710880  150012 71
Insertion Loss - C2-071QS
 631252505001000200040008000
4610181913117
Features

These notes apply to both the open and pod type attenuators.

Construction

The units are rigidly constructed and consist of an outer cylindrical galvanised steel casing, lined internally with non-hygroscopic and incombustible sound-absorbent material. This material is retained by an inner perforated metal cylinder.

When a pod is fitted it is of perforated metal, retaining an infill of acoustic material.

An impervious lining of the acoustic infill can be provided to prevent the ingress of moisture or grease. There is a small performance penalty in high frequencies when an impervious lining is fitted. Refer to our Sales Engineers if more information is required.

The ends of the attenuators are drilled and tapped to match the Fantech ‘AP’ and ‘FP’ series of axial flow fans.

Non-standard flange drillings or sizes can be supplied to the customer’s specifications.

Insertion Loss

The values quoted in the table represent the difference between the sound power level (Lw) of a fan and attenuator combination and that of the fan alone.

Selection

To ascertain the sound power level of a fan fitted with an attenuator, the insertion loss should be subtracted from the sound power level (Lw) rating of the fan across the octave band mid-frequency spectrum quoted in the fan characteristic data (obtainable on request).

The fan sound power, Lw, ratings and attenuator insertion loss apply to in-duct operation and where an attenuator is connected betweeen the fan and duct system.

Rectangular Attenuators

Whilst circular attenuators provide a convenient form of attenuation when used with axial flow fans and have the added advantage of minimising noise break-out, it is often more economical to consider standard rectangular attenuators.

Please refer to the pages H-13/15 for details of these.

Purpose-designed attenuators can be supplied for particularly demanding applications requiring performances or construction beyond that provided by our standard product.

Elta Group