|
Description
The Series 1 range of Filtered Supply Units meets the modern demands of the telecommunications and electronic industries. This range supplies clean filtered air which provides protection for sensitive electronic equipment of mobile telephone networks, or general communications buildings, switchrooms, computer rooms or similar.
Features
Construction
Galvanised steel housing, finished in ‘off-white’ powder coat as standard.
Integral all-steel weatherproof inlet grille.
PVC non-return dampers to prevent unwanted air flow.
Motor
Type - external rotor, squirrel cage induction motor.
Electricity supply - 220-240V, single-phase, 50/60Hz.
Bearings - sealed-for-life, ball.
Speed-controllable.
Internal Protection
Auto-reset type fitted as standard on all units.
Testing
Tests to BS848:Part 1, 1980 with clean filters.
Room pressurisation levels will be governed by the size of the available wall openings for air relief.
Special Note
Installation
Designed to mount flush with the inside wall. Four mounting holes in the flange are provided to secure the unit to the wall. Fasteners by others
Filter Performance
Disposable filter media is used with a performance classification of G4 as tested in accordance with AS1324.2-2001 and rated as per AS1324.1-2001. These ratings are equivalent to the Eurovent 4/5 classification for filters as outlined in EN779.
Filter access is via a side-mounted access panel.
Special Features
Installation
Designed to mount flush with the inside wall. Four mounting holes in the flange are provided to secure the unit to the wall. Fasteners by others
Filter Performance
Disposable filter media is used with a performance classification of G4 as tested in accordance with AS1324.2-2001 and rated as per AS1324.1-2001. These ratings are equivalent to the Eurovent 4/5 classification for filters as outlined in EN779.
Filter access is via a side-mounted access panel.
|