DWDI Centrifugal Fan - Laminar – 30LDW
Location Designation
Project Notes
DWDI Centrifugal Fan - Laminar
Description
The Centrifugal Fan range of backward-inclined laminar or aerofoil-section fans, encompasses both single-width and double-width units.
They feature high strength fully welded mild steel casings and each range is available in 20 sizes, extending from 305mm (12 inch) to 2035mm (80 inch) diameter.
Features
  • Casings are made of high strength fully welded mild steel.
  • Finished in a durable prime coat of grey coloured zinc phosphate. Other finishes available.
  • Choice of high performance backward-inclined laminar or aerofoil-section blades available.
  • Impellers are a high strength welded construction.
  • Wide range of performances available. See Special Note.
  • Multi-speed motors can be supplied.
  • Belt or direct-drive arrangements available.
  • Speed-controllable using variable speed drives.
  • Can be ordered to handle hot, toxic, noxious or explosive gases.
  • Casings are made of high strength fully welded mild steel.
  • Finished in a durable prime coat of grey coloured zinc phosphate. Other finishes available.
  • Choice of high performance backward-inclined laminar or aerofoil-section blades available.
  • Impellers are a high strength welded construction.
  • Wide range of performances available. See Special Note.
  • Multi-speed motors can be supplied.
  • Belt or direct-drive arrangements available.
  • Speed-controllable using variable speed drives.
  • Can be ordered to handle hot, toxic, noxious or explosive gases.
Construction
Fully welded mild steel casings.
Prime coat of grey, zinc phosphate is the standard finish.
Impellers are fully welded and are available as backward-inclined laminar(L) or aerofoil-section(AL) design.
Motor
Type - squirrel cage induction motors
Electricity supply - single or three-phase to suit a wide range of voltages and frequencies.
Bearings - ball or roller.
Motors with multi-speed windings or to suit Ex d, Ex e, Ex nA, Ex tD. or similar special needs can be fitted.
Internal Protection
Thermistors can be provided.
Testing
Air flow tests to BS848:Part 1 1980
Noise tests to AS1217-1972
Special Note
Special Features
Performance Curve for DWDI Centrifugal Fan - Laminar 30LDW

Technical Data - 30LDW

Speed [rps] Avg. dBA @ 3m kWatts (Input) Amps Max.°C Approx. Weight [kg]
– – – – – –
 
DWDI Centrifugal Fan - Laminar – 30LDW
Suggested Specification
The Centrifugal Fans shall be of the SWSI or DWDI type as supplied by Fantech Pty Ltd.
The housings shall be of welded mild steel with a grey, zinc phosphate finish.
Impellers shall suit single-width or double-width arrangements as required and be backward-inclined laminar or aerofoil-section. Impellers shall be fully welded.
All fans shall be tested to BS848:Part 1 1980 for air flow and AS1217-1972 for noise.
 
Contacts



OFFICES & AGENTS

Victoria
Fantech Pty. Ltd.
Tel:+61 (03) 9554-7845

New South Wales
Fantech Pty. Ltd.
Tel:+61 (02) 8811-0400

Uniair Distributors Pty. Ltd.
Tel:+61 (02) 4961-6088
Refrigeration and Air Supplies
Tel:+61 (02) 4226-5133

South Australia
Fantech Pty. Ltd.
Tel:+61 (08) 8294-0530

Queensland
Fantech Pty. Ltd.
Tel:+61 (07) 3299-9888
Capricorn Air Conditioning
Tel:+61 (07) 4775-5222

Northern Territory
Fantech Pty. Ltd.
Tel:+61 (08) 7918-5122

Western Australia
Systemaire Pty. Ltd.
Tel:+61 (08) 9209-4999

Tasmania
Major Air Pty. Ltd.
Tel:+61 (03) 62736455

ACT
Idealair Group Pty. Ltd.
Tel:+61 (02) 6280-5511

Auckland
Fantech (NZ) Ltd.
Tel:+64 (09) 444-6266

Christchurch
Fantech (NZ) Ltd.
Tel:+64 (03) 379-8622

Wellington
Fantech (NZ) Ltd.
Tel:+64 (04) 566-0532