The Fantech Velocity header box fan complete with square or round grille features quiet operation and powerful air flow performance. It includes a fully optimised inlet cone, low resistance backdraft damper and centrifugal impeller that maximises air pressure and ensures rooms such as ensuites and bathrooms are quickly cleared of steam and unpleasant odours.

Features

• Comes complete with a modern square or round grille
• Advanced impeller and housing design provides powerful air flow and minimises noise
• Low resistance non-return backdraft damper maximises air flow performance
• Easy to remove diffuser makes cleaning simple
• Can be retrofitted into a standard 10” round fan cut out
• Fitted plug and lead simplifies installation
• Available with a 3 to 15 minute adjustable run-on timer

• Comes complete with a modern square or round grille
• Advanced impeller and housing design provides powerful air flow and minimises noise
• Low resistance non-return backdraft damper maximises air flow performance
• Easy to remove diffuser makes cleaning simple
• Can be retrofitted into a standard 10” round fan cut out
• Fitted plug and lead simplifies installation
• Available with a 3 to 15 minute adjustable run-on timer

Construction
Housing and diffuser are made from injection moulded polypropylene. Fans are forward-curved centrifugal, driven by a squirrel cage motor.

Motor
Type - squirrel cage induction motor.
Electricity supply - 230V, single-phase, 50Hz.
Bearings - sealed for life, ball.
See pages O-2/3 for details on these motors.

Internal Protection
Automatic reset thermal protection is fitted as standard

Testing
Air flow to ISO5801: 2007
Noise to ISO3744: 2010

Special Note

• Easy duct connection
• Fan body to plaster cutout connection
• Easy clip-in grille connection

Special Features

• Easy duct connection
• Fan body to plaster cutout connection
• Easy clip-in grille connection

The ceiling fans shall be of the Fantech Velocity Header Box Series as designed by Fantech Pty Ltd. and be of the model number shown on the schedule/drawing.

Impellers shall be forward-curved centrifugal and driven by a squirrel cage motor with integral thermal protection. They shall be fitted with high strength swing clips, removable spigot, low resistance non-return backdraft damper and removable diffuser. They shall include a plug and lead, and its housing and diffuser be made of injection moulded polypropylene.

They shall be tested to ISO5801: 2007 for air flow and ISO3744: 2010 for noise.