GE Series – CGE454
Location Designation
Project Notes
GE Series
Description
The GE Series of vertical exhaust centrifugal roof units has been specifically designed to exhaust grease and oil laden air from applications such as fast food and restaurant kitchens. The design incorporates a grease/water separator which plumbs excess water away from the unit while retaining the oil in a reservoir for later removal.
There are 7 sizes in the range extending from 350 to 710mm diameter.
Features
  • Robust, galvanised construction.
  • Choice of speeds available.
  • Fitted with a high performance backward-curved centrifugal fan.
  • Quick release toggle clamps on windband provide easy access for cleaning and maintenance of impeller.
  • Backward tilting fan body allows easy access for cleaning unit base.
  • Grease/water separator retains oil in a reservoir for later removed.
Construction
 Galvanised steel construction with a powder-coated finish. Backward-curved centrifugal impellers.
Motor
 Type - standard squirrel cage induction motors
Electricity supply - single or three-phase to suit a wide range of voltages and frequencies
Bearing - sealed-for-life, ball
Speed-controllable using variable speed drives
Internal Protection
 Thermistors can be supplied on request
Testing
 Air flow to BS848:Part 1, 1980
Noise tests to BS848,Part 2, 1985
Special Note
  • Designed for vertical exhaust only.
  • Designed for mounting on horizontal upstands only.
    		•
    Performance Curve for GE Series CGE454

    Technical Data - CGE454

    Speed [rps] Avg. dBA @ 3m kWatts (Input) Amps Max.°C Approx. Weight [kg]
    24 57 0.55 3.86 40 104

    Sound Data

    Type 63 125 250 500 1K 2K 4K 8K
    Inlet 84 82 77 74 68 69 69 65
     
    GE Series – CGE454
    Suggested Specification
    The roof ventilators shall be of the GE Series vertical exhaust type as designed and manufactured by Fantech Pty Ltd.
    Impellers shall be backward-curved centrifugal design. The housing shall incorporate a grease/water separator and grease reservoir. Access for impeller cleaning shall be by removal of the windband via quick release toggle clamps. Access for cleaning the base shall be via a tilt back fan body.
    All models shall be fully tested as a complete assembled unit to BS848:Part1, 1980 for air flow and BS848:Part 2 for noise.
    		  

    Dimensions

    Dimension Drawing for GE Series CGE454
    A B C D E F
    800 900 935 928 60 980

    *All dimensions in mm, unless otherwise stated
    Contacts



    OFFICES & AGENTS

    Victoria
    Fantech Pty. Ltd.
    Tel:+61 (03) 9554-7845

    New South Wales
    Fantech Pty. Ltd.
    Tel:+61 (02) 8811-0400

    		 Uniair Distributors Pty. Ltd.
    Tel:+61 (02) 4961-6088
    Refrigeration and Air Supplies
    Tel:+61 (02) 4226-5133

    South Australia
    Fantech Pty. Ltd.
    Tel:+61 (08) 8294-0530

    Queensland
    Fantech Pty. Ltd.
    Tel:+61 (07) 3299-9888
    Capricorn Air Conditioning
    Tel:+61 (07) 4775-5222

    Northern Territory
    Fantech Pty. Ltd.
    Tel:+61 (08) 7918-5122

    Western Australia
    Systemaire Pty. Ltd.
    Tel:+61 (08) 9209-4999

    Tasmania
    Major Air Pty. Ltd.
    Tel:+61 (03) 62736455

    ACT
    Idealair Group Pty. Ltd.
    Tel:+61 (02) 6280-5511

    Auckland
    Fantech (NZ) Ltd.
    Tel:+64 (09) 444-6266

    Christchurch
    Fantech (NZ) Ltd.
    Tel:+64 (03) 379-8622

    Wellington
    Fantech (NZ) Ltd.
    Tel:+64 (04) 566-0532