ProVent Series – RIL-200TSW
Location Designation
Project Notes
ProVent Series
Description
The ProVent Series of in-line mixed-flow fans have been specifically designed for ducted supply or exhaust air applications.
There are 6 models in the range matching standard duct sizes from 100 to 200mm diameter.
Features
  • High performance mixed-flow Impeller.
  • Models 150SW and 200SW include an external mounted 2-speed switch.
  • Models 150TSW and 200TSW include a 1-30 minute adjustable run-on timer and external mounted 2-speed switch.
  • Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets.
  • Integrated mounting foot makes installation easier.
  • All models include plug and lead for easy installation.
  • Can be mounted in any position.
  • High performance mixed-flow Impeller.
  • Models 150SW and 200SW include an external mounted 2-speed switch.
  • Models 150TSW and 200TSW include a 1-30 minute adjustable run-on timer and external mounted 2-speed switch.
  • Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets.
  • Integrated mounting foot makes installation easier.
  • All models include plug and lead for easy installation.
  • Can be mounted in any position.
  • Construction
    The housings are of reinforced, injection moulded polypropylene plastic.
    The mixed-flow impellers are of injection moulded plastic.
    Motor
    Type - 2-speed, squirrel cage, capacitor run.
    Electricity supply - 230V, single-phase, 50Hz.
    Class B insulation, IP44.
    Bearings - sleeve for RIL-100 and RIL-125, ball for all other models.
    Speed-controllable using VA type speed controller in high speed setting only.
    The RIL-150TSW and RIL-200TSW cannot be speed controlled.
    Testing
    Air flow to ISO5801:Part1, 1997
    Noise to BS848:Part 2, 1985
    Meets requirements of AS/NZS60335-2-80:2004

    Technical Data - RIL-200TSW

    SettingSpeed [rps]Avg. dBA @ 3mkWatts (Input)Amps Max.°C Approx. Weight [kg]
    Lo33420.10.45604.9
    Hi42470.120.5604.9

    Sound Data

    SettingType631252505001K 2K4K8K
    HiInlet5358 616464 655952
    HiOutlet7262 626468 676254
    HiBreakout4654 524952 534333
    LoInlet4853 565958 605447
    LoOutlet6757 565963 625749
    LoBreakout4149 474347 483828

     

    ProVent Series – RIL-200TSW
    Suggested Specification
    The in-line fans shall be of the ProVent Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.

    Impellers shall be of mixed-flow design and driven by a single-phase motor. Internal thermal protection shall be by fuse on 100 and 125mm spigot models and by manual-reset on 150 and 200mm models.

    It shall include an integral mounting foot, plug and lead and specially designed support brackets to enable motor removal.
    All fans shall be fully tested to ISO5801: Part1, 1997 for air flow and BS848:Part 2, 1985 for noise.
     

    Dimensions

    ABCDEFG
    12494141100302198217

    *All dimensions in mm, unless otherwise stated

    Contacts



    OFFICES & AGENTS

    Victoria
    Fantech Pty. Ltd.
    Tel:+61 (03) 9554-7845

    New South Wales
    Fantech Pty. Ltd.
    Tel:+61 (02) 8811-0400

    Uniair Distributors Pty. Ltd.
    Tel:+61 (02) 4961-6088
    Refrigeration and Air Supplies
    Tel:+61 (02) 4226-5133

    South Australia
    Fantech Pty. Ltd.
    Tel:+61 (08) 8294-0530

    Queensland
    Air Design Pty. Ltd.
    Tel:+61 (07) 3299-9888
    Capricorn Air Conditioning
    Tel:+61 (07) 4775-5222

    Northern Territory
    Fantech Pty. Ltd.
    Tel:+61 (08 ) 8947-0447

    Western Australia
    Systemaire Pty. Ltd.
    Tel:+61 (08) 9209-4999

    Tasmania
    Major Air Pty. Ltd.
    Tel:+61 (03) 62736455

    ACT
    Idealair Group Pty. Ltd.
    Tel:+61 (02) 6280-5511

    Auckland
    Fantech (NZ) Ltd.
    Tel:+64 (09) 444-6266

    Christchurch
    Fantech (NZ) Ltd.
    Tel:+64 (03) 379-8622

    Wellington
    Fantech (NZ) Ltd.
    Tel:+64 (04) 566-0532