ProVent Series – RIL-100
Location Designation
Project Notes
ProVent Series
Description
The ProVent Series of in-line mixed-flow fans have been specifically designed for ducted supply or exhaust air applications.
There are 6 models in the range matching standard duct sizes from 100 to 200mm diameter.
Features
  • High performance mixed-flow Impeller.
  • Models 150SW and 200SW include an external mounted 2-speed switch.
  • Models 150TSW and 200TSW include a 1-30 minute adjustable run-on timer and external mounted 2-speed switch.
  • Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets.
  • Integrated mounting foot makes installation easier.
  • All models include plug and lead for easy installation.
  • Can be mounted in any position.
  • High performance mixed-flow Impeller.
  • Models 150SW and 200SW include an external mounted 2-speed switch.
  • Models 150TSW and 200TSW include a 1-30 minute adjustable run-on timer and external mounted 2-speed switch.
  • Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets.
  • Integrated mounting foot makes installation easier.
  • All models include plug and lead for easy installation.
  • Can be mounted in any position.
  • Construction
    The housings are of reinforced, injection moulded polypropylene plastic.
    The mixed-flow impellers are of injection moulded plastic.
    Motor
    Type - 2-speed, squirrel cage, capacitor run.
    Electricity supply - 230V, single-phase, 50Hz.
    Class B insulation, IP44.
    Bearings - sleeve for RIL-100 and RIL-125, ball for all other models.
    Speed-controllable using VA type speed controller in high speed setting only.
    The RIL-150TSW and RIL-200TSW cannot be speed controlled.
    Testing
    Air flow to ISO5801:Part1, 1997
    Noise to BS848:Part 2, 1985
    Meets requirements of AS/NZS60335-2-80:2004

    Technical Data - RIL-100

    SettingSpeed [rps]Avg. dBA @ 3mkWatts (Input)Amps Max.°C Approx. Weight [kg]
    Lo31320.0180.1402
    Hi37370.0240.11402

    Sound Data

    SettingType631252505001K 2K4K8K
    LoInlet4943 555149 423224
    LoOutlet4139 545148 433225
    LoBreakout3932 544243 402516
    HiInlet5448 605754 473729
    HiOutlet4644 605653 483830
    HiBreakout4437 594748 453021

     

    ProVent Series – RIL-100
    Suggested Specification
    The in-line fans shall be of the ProVent Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.

    Impellers shall be of mixed-flow design and driven by a single-phase motor. Internal thermal protection shall be by fuse on 100 and 125mm spigot models and by manual-reset on 150 and 200mm models.

    It shall include an integral mounting foot, plug and lead and specially designed support brackets to enable motor removal.
    All fans shall be fully tested to ISO5801: Part1, 1997 for air flow and BS848:Part 2, 1985 for noise.
     

    Dimensions

    ABCDEFG
    100601158030397176

    *All dimensions in mm, unless otherwise stated

    Contacts



    OFFICES & AGENTS

    Victoria
    Fantech Pty. Ltd.
    Tel:+61 (03) 9554-7845

    New South Wales
    Fantech Pty. Ltd.
    Tel:+61 (02) 8811-0400

    Uniair Distributors Pty. Ltd.
    Tel:+61 (02) 4961-6088
    Refrigeration and Air Supplies
    Tel:+61 (02) 4226-5133

    South Australia
    Fantech Pty. Ltd.
    Tel:+61 (08) 8294-0530

    Queensland
    Air Design Pty. Ltd.
    Tel:+61 (07) 3299-9888
    Capricorn Air Conditioning
    Tel:+61 (07) 4775-5222

    Northern Territory
    Fantech Pty. Ltd.
    Tel:+61 (08 ) 8947-0447

    Western Australia
    Systemaire Pty. Ltd.
    Tel:+61 (08) 9209-4999

    Tasmania
    Major Air Pty. Ltd.
    Tel:+61 (03) 62736455

    ACT
    Idealair Group Pty. Ltd.
    Tel:+61 (02) 6280-5511

    Auckland
    Fantech (NZ) Ltd.
    Tel:+64 (09) 444-6266

    Christchurch
    Fantech (NZ) Ltd.
    Tel:+64 (03) 379-8622

    Wellington
    Fantech (NZ) Ltd.
    Tel:+64 (04) 566-0532