Delta Series – WCE314S
Performance Curve - WCE314S
DescriptionThe Delta Series is designed for wall mounting and is suitable for a wide range of applications.
Cowls are of UV-stabilised plastic or steel. Steel components have a corrosion-resistant finish.
Backward-curved centrifugal impellers.
Type - external rotor, squirrel cage induction motor.
Electricity supply - single or three-phase, 50Hz.
Bearings - sealed-for-life, ball.
Thermal protection is supplied as standard on all units. Both auto-reset and manual-reset types are used. Check with our sales engineers for the type fitted.
Air flow test to AS2936:1987, SAA Fan Test code (1).
Noise test to BS848:Part 2, 1985.
Both supply and exhaust designs.
Ready access to fan impeller and motor from inside or outside the building is a feature of the design.
Twin fans provide a 100% stand-by facility for a limited range of models. Contact our sales office for selections and dimensions.
Suggested SpecificationThe Delta Series of wall mounted units shall be as designed and manufactured by Fantech Pty. Ltd.
Impellers shall be of backward-curved centrifugal design and driven by speed-controllable external rotor motors with integral thermal protection.
The housings shall be designed to permit access to the fan from inside or outside the building.
All models shall be fully tested to AS2936:1987 Fan Test Code (1) for air flow and BS848:Part 2, 1985 for noise in a fully certified laboratory.
Technical Data - WCE314S
|Speed [rps]||Avg. dBA @ 3m||kWatts (Input)||Amps ||Max.°C ||Approx. Weight [kg]|
|Inlet||83||77|| 69||66||58|| 58||56||50|
*All dimensions in mm, unless otherwise stated